How Much Does It Cost to Regrout a Shower in Australia? (A 2026 Guide)

Most people who call us want a straight number before anything else, so here it is.

Across Australia, a professional shower regrout in 2025 typically ran from about $600 to $2,500, with an average near $1,500. For 2026 we are indicating a range of roughly $630 to $2,625 and an average of about $1,575, which follows the rise in building costs over the past year. These figures are indicative only and are not a fixed quote, because no two showers are the same.

In this post, we will set the 2025 and 2026 prices next to each other, explain why costs moved, walk through what a professional quote covers, and show you what pushes a job towards the lower or higher end. We will also help you judge when regrouting is enough and when a tile needs repair first, so you can ask for a quote that suits your own bathroom.

Key Takeaways

• Our 2025 range of $600 to $2,500 becomes roughly $630 to $2,625 for 2026, with an average near $1,575.
• Shower size, tile format, grout type and the condition of the old grout have the biggest say in your price.
• A fair quote covers inspection, grout removal, preparation, new grout, silicone where needed, curing and clean up.
• Loose, cracked or damaged tiles may need tile repair or replacement before regrouting can be completed properly.

2025 Versus 2026 Shower Regrouting Cost Comparison

The table below groups showers by floor area in square metres, which is the easiest measurement to take at home. A standard 900 mm by 900 mm shower base is about 0.8 square metres.

The 2026 column applies a 4.9% uplift to our 2025 figures and rounds to the nearest $5. Please treat it as an indicative comparison and not a fixed quote. Your own price depends on the tiles, the grout and the state of the shower when we arrive, all of which we cover further down.

Why Shower Regrouting Prices Changed in 2026

Shower regrouting prices can move for a few reasons. Some changes are linked to the wider construction market, while others come from the job itself.

Labour is a major part of the cost because proper regrouting takes time and care. Old grout needs to be removed without damaging the surrounding tiles. The area then needs to be cleaned, prepared, regrouted and finished in a way that suits regular water exposure.

Materials can also influence pricing. Grout, silicone, sealers, cleaners, blades, protective products and other trade supplies may cost more than they did in earlier years. Travel time, parking, access and service demand across Sydney can also affect what it costs to deliver the work.

The broader building market gives some useful context. The ABS reported a 4.9% annual rise in building construction output prices to June 2026, with labour and material pressures still affecting parts of the industry. However, shower regrouting is a specialised maintenance service, so a homeowner should treat that figure as background information rather than a direct pricing rule.

What a Professional Shower Regrouting Quote Includes

A professional shower regrouting quote should be based on more than the tiled area alone. When we assess a shower, we look at the condition of the grout, the tiles, the silicone joints, the level of staining or mould, and whether the shower is still structurally suitable for regrouting.

A professional quote may include the following work, depending on the shower:

• Inspection:We check the grout, the silicone joints and the tiles themselves for movement, cracks and signs of water getting behind the surface.
• Old grout removal: Our team uses power tools set to a depth of 3 to 4 mm so the old grout comes out without chipping the tile edges.

• Preparation and cleaning: Every joint is cleaned of dust and residue so the new grout can bond properly.
• New grout: We apply fresh grout across the shower, and the product we use contains a biocide that resists a range of moulds and bacteria. Where epoxy suits your tiles, it is priced as a separate option.

• Silicone and sealing where applicable: Corners and the joint between wall and floor are resealed with new silicone, and grout is sealed when the product calls for it.
• Labour: This is the largest part of any regrouting price, because the skill lies in the removal and the finish.
• Curing: Your shower needs about 24 hours before it gets wet, so we will tell you exactly when it is safe to use again.
• Final clean up: We leave the tiles wiped down and the bathroom as tidy as we found it.

What Affects the Cost of Regrouting a Shower

Two showers of the same size can land far apart on price. The following are the details that move a quote up or down:

Shower Size and Layout

A small cubicle in a one bedroom apartment can often be finished in around half a day, while a large walk-in shower with full height tiling and two shower heads takes much longer. More tiled area means more grout to remove, more to apply and more to clean, so the size bands in the table above grow steadily with floor area.

Tile Format and Grout Line Density

Small tiles create many more grout lines than large ones. A wall of mosaic tiles can cost noticeably more than the same area in large format porcelain, because every extra line has to be cut out and refilled by hand. Delicate surfaces such as glass or natural stone also call for slower, more careful work.

The width of the line matters too. Narrow joints under about 3 mm need unsanded grout and a steady hand, and wider joints of around 6 mm take more material and show uneven finishing more easily.

Grout Type

The grout you choose affects the look of the shower, how long it holds up and what the job costs. Cement based grout is the most affordable but is porous, so it relies on good sealing. Polymer modified grout is a middle option, and epoxy grout sits at the top of the price range because it is dearer to buy and slower to apply. The figures below are per square metre of tiled surface and are indicative only.

Access

A tight cubicle, a shower screen that gets in the way, or a unit in a building with limited parking can all add time. If your bathroom is hard to reach or the work area is cramped, please tell us when you ask for a quote.

Existing Damage and Mould

Grout that has crumbled deeply, joints that have turned black with mould and hairline cracks in the tiles all add preparation time. Mould that has gone below the surface takes more effort to clean out before new grout goes in, and any sign of water movement behind the tiles is worth looking at before we start.

Silicone Replacement

Old silicone around corners, screens and the floor edge often looks tired and traps mould. Removing it and applying fresh silicone is usually part of a proper shower regrout, and it is shown as its own line when it needs a separate price.

Location

Travel time, parking and building access all play a part in how long a visit takes. We work across Sydney, from Parramatta to the Northern Beaches, and prices elsewhere in New South Wales and Australia can differ because labour rates and travel distances differ.

Regrouting Versus Tile Repair or Replacement

Regrouting suits a shower where the tiles are firmly stuck down and the problem sits in the joints. Grout that has turned grey or black, cracked, shrunk or gone missing can usually be renewed without touching the tiles, and the shower is only out of action for about a day.

The picture changes when the tiles themselves have given up. A tile that sounds hollow when tapped, moves under light pressure or has a crack running through it will not hold new grout for long, and water can get behind it. In that case the tile should be repaired or replaced first, and we can lay the replacement before regrouting the area. If you have spare tiles from the original installation, please keep them handy, because we ask for the replacements to be on site before we arrive so the size and finish match.

Silicone is a similar story. Failed silicone around the corners and screen edges is replaced as part of the job, and you can read more about that on our tile replacement and silicone repairs page. If water is showing up outside the shower, a stained ceiling below or damp walls beside it, the cause may lie deeper than the grout, and we will say so honestly when we see it.

How We Prepare an Accurate Quote

A figure from a table can only take you so far, so we like to see the shower before we put a price on it.

You can start by sending us a few photos along with your suburb, the approximate size of the shower and the type of tiles, and we will give you a sense of where your job is likely to sit.

From there we arrange a time to look at the shower in person. We check the condition of the grout and silicone, tap a few tiles to listen for movement, note how much mould is present and take stock of access. Once that is done, you receive a fixed quote that lists what is included, so you can compare it fairly with any other quote on your table.

There is no charge for any of this, and no pressure to say yes on the day. We would rather you choose with the full picture than choose on price alone.

Frequently Asked Questions About Shower Regrouting Costs

How much does it cost to regrout a shower in Sydney?

For 2026 we are indicating roughly $630 to $2,625 for most showers, with an average near $1,575. Your own figure depends on the size of the shower, the tiles, the grout and the condition of what is there now, which is why we give a free site specific quote.

How long does shower regrouting take?

A typical shower recess takes about four hours to regrout, and most full bathrooms are finished in a day. The shower then needs around 24 hours to cure before it is used.

Is epoxy grout worth the extra cost?

Epoxy grout costs more to buy and takes more skill to apply, so it raises the price of the job. Whether it is worth it depends on your tiles, how heavily the shower is used and your budget, and we can show it as a separate option in your quote.

Can new grout be applied over the old grout?

We remove the old grout first, to a depth of 3 to 4 mm, because the new grout needs a clean, solid joint to bond with. Covering the old material tends to trap mould and leads to early cracking.

Will regrouting stop my shower from leaking?

Fresh grout and silicone restore the seal in the joints, which is a common cause of seepage. If the waterproofing beneath the tiles has failed, regrouting on its own will not fix it, and our stop leaking showers service is the better starting point.

Why do regrouting quotes vary so much between providers?

Quotes differ because the scope differs. One may include full grout removal, silicone replacement and a final clean, while another covers only a light top up. Asking each provider to list what is included makes the comparison fair.

Which areas do you service?

We service Sydney wide, including Bankstown, Blacktown, Cabramatta, the Inner West, the Hills area, Mosman, the Northern Beaches, Hornsby, Liverpool, Parramatta, Penrith, Strathfield and Sutherland. If you are unsure whether we reach your suburb, just ask and we will let you know.

Request Your Free Shower Regrouting Quote in Sydney

At Tile Regrouting, we would rather explain the work and let the price speak for itself than push you into a quick decision.

If your shower grout is cracked, stained or starting to let go, we would be glad to take a look. Our team will visit you on site, check your tiles and silicone, and give you a free quote that is written for your shower and nobody else’s. You can request your free quote online or call us on 02 9822 1872, and we will find a time that suits you.